Official 7Semi INA219 Voltage, Current, Power Monitor Sensor Breakout I2C
-
High-Side Voltage, Current & Power Monitoring
-
Bus Voltage Measurement: 0V–26V
-
Onboard Precision Shunt Resistor
-
I2C & SMBus Communication Interface
-
16 Programmable I2C Addresses
-
Internal Calibration & Power Calculation
-
Programmable Gain, Conversion Time & Filtering
-
Low Power Consumption (~1 mA Standby)
-
Compact Breakout Board Design
-
Compatible with Arduino, Raspberry Pi & ESP32
HX711 Weighing Pressure Sensor Module Big Size
- Output Sensitivity: 1.0 ± 0.1 mV / V.
- Two selectable differential input channels.
- On-chip active low noise PGA with the selectable gain of 32, 64 and 128.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Measurement Resolution: 24 bit.
ACEBOTT Smart Car Starter Kit – QD001
- Power Supply Voltage: 4.5V ~ 12V
- Motor Drive Chip: L293D
- Speed Adjustment: PWM speed adjustment
- Driving Current: 0.6A (peak 1.2A)
- Logic Control Chip: 74HC595D
- Interfaces: Serial port, ultrasonic, line patrol, 3-way analog reading, 3-way steering gear
Plastic Container Box (Keeper Box)
Metal Fixed Bracket for HC-SR04 Ultrasonic Module
- Metal Body.
- Easy to install.
- Attractive Design and Structure.
3PI miniQ Car Kit: wheel Tyre + 12mm N20 Micro Gear Motor + Motor Mount
- For Vehicle Type: Cars
- Material: Plastic
- Use: Vehicles & Remote Control Toys
- Width : 12mm
- Special Note: only for HM N20 series motor
Official 7Semi DC Buck Converter Breakout 3.8V 2A Out (AP62301)
-
Fixed 3.8V DC Output
-
Up to 2A Continuous Current
-
Based on AP62301 Synchronous Buck Converter
-
Wide Input Voltage: 4.2V–14V DC
-
High Efficiency Step-Down Regulation
-
Low EMI Optimized Design
-
High Switching Frequency up to 2.2MHz
-
Ultra-Compact 18 × 16 mm PCB
-
Stable Output for Battery-Powered Devices
-
Ideal for IoT & Embedded Applications
Texas Instruments LAUNCHXL-F280025C F280025C LaunchPad development kit
-
Based on TI C2000™ F28002x real-time microcontroller
-
Low-cost LaunchPad™ development and evaluation board
-
Designed for real-time control applications
-
Extended version with additional I/O pins
-
Supports connection of two BoosterPack™ plug-in modules
-
Compatible with the TI MCU LaunchPad ecosystem
5V Thermal sensor module relay module
- Supply voltage: 5VDC
- Current: greater than 150mA
- Switching Voltage: 250VAC@10A; 30VDC@10A
GY-53 VL53L0X Laser ToF Flight Time Ranging Sensor Module (High Quality)
- VL53L0X 3-in-1 ranging and gesture detection sensor
- Regulator: 5 to 2.8V range input voltage (output voltage: 2.8V)
- VL53L0X signal interface level shifter
- Serial Port PWM Output
- True distance measurement independent of target size and reflectance
- Breakout board, easy to integrate into the customer device
- Allows basic gesture recognition use case.
Official 7Semi DC Buck Converter Breakout 3.3V 2A Out (AP62301)
-
Fixed 3.3V DC Output
-
Up to 2A Continuous Output Current
-
Based on AP62301 Synchronous Buck Converter
-
Wide Input Voltage Range: 4.2V–14V
-
Low EMI Optimized Design
-
High Efficiency Step-Down Conversion
-
Low Output Ripple & Stable Regulation
-
Built-In Over-Current & Over-Temperature Protection
-
Soft-Start for Safe Power-Up
-
Ideal for IoT, Embedded & Battery-Powered Applications
Official 7Semi DC Buck Converter Breakout 5V 2A Out (AP62301)
-
5V DC output with up to 2A continuous current
-
Wide input voltage range: 7V to 14V DC
-
AP62301 synchronous buck converter IC
-
Low EMI design for noise-sensitive applications
-
High efficiency with low output ripple
-
Compact 18 × 16 mm breakout board
-
Built-in protection: over-current & over-temperature
GY-30 BH1750FVI Module Digital Light Intensity Illumination Sensor
- High precision determination accurate to 1 Lux for different lights
- Operating Voltage: 3-5VDC
- Built-in 16bit A/D converter
- I2C interface
Official MSP-EXP430FR4133 MSP430FR4133 LaunchPad™ series – MCU 16-Bit Embedded Evaluation Board
-
Based on MSP430FR4133 ultra-low-power microcontroller with FRAM memory
-
Includes onboard segmented LCD display for real-time interface
-
Features 10-bit ADC, programmable buttons, and user LED
-
Integrated onboard debugger for programming and energy measurement
-
Out-of-the-box stopwatch and temperature sensing demo included
-
Supports 20-pin BoosterPack™ plug-in modules for expansion
-
Perfect for data logging, embedded sensing, and IoT development
-
Operates efficiently in battery-powered and energy-harvesting applications
Official 7Semi INA240A1 4~80V Bidirectional Current Sense Amplifier Breakout 20V/V Gain
-
Texas Instruments INA240 current-sense amplifier
-
Fixed 20 V/V gain for precise current measurement
-
Wide common-mode voltage range: –4V to 80V
-
Enhanced PWM rejection for noisy environments
-
Supports bidirectional current sensing
-
Ideal for motor drives and power management systems
-
Easy-to-use breakout board for rapid integration
Ethernet W5100 Shield Network Expansion Board with Micro SD Card Slot for Arduino
- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Can be accessed using the Mini SD TF library.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
3.5 inch TFT Shield LCD Module 480×320 for Arduino Uno with Touch(Parallel Interface)
-
3.5-inch TFT LCD screen size
-
480 × 320 pixel resolution
-
65K RGB color display
-
ILI9486 display driver IC
-
8-bit parallel interface
-
Resistive touch panel support
-
On-board micro-SD card slot for media loading
-
Compatible with both 5V and 3.3V logic levels
5-Channel Flame Sensor Module
- Detecting range: >120 degree
- Analog and digital outputs
- On-board potentiometer and indicators
- 1% resistors to make this module more reliable and precise
- Operating Voltage: 3.3V – 9V
- Board Diameter: 40 mm.
Test Hooks Clip for Logic Analyzers(Random Colours)
- Its a 1 pin tool
- This is a very easy to use tool
- Color: Red or Black or Blue or white or Green
- Dimensions 5 × 5 × 5 cm
- Weight: 0.026 kg
MSP-EXP430F5529LP MSP430F5529 USB LaunchPad Evaluation Board
- USB 2.0-enabled MSP430F5529 16-bit MCU
- Up to 25 MHz
- 128KB Flash and 8KB RAM
- 12 Bit SAR ADC
- Various USB device class examples and embedded software libraries available (CDC, HID, MSC)
- eZ-FET lite: Open source onboard debugger with application UART
- One USB connection for emulator and target via the use of an onboard USB hub
- USB as power source: 5V and 3.3V through a high efficiency DC/DC converter
- 40 pin LaunchPad standard leveraging the BoosterPack ecosystem
