NUCLEO-WL33CC2 STM32WL33CC MCU (433MHz) Nucleo-64 Development Board
- Delivered with SMA antenna
- Three user LEDs
- Three user and one reset push-buttons
- Board connectors: USB Type-C®, ARDUINO® Uno V3 expansion connector, ST morpho extension pin headers
- Flexible power-supply options: ST-LINK USB VBUS or external sources
- On-brd STLINK-V3EC debug/programmer w/ USB re-enumeration capability:mass storage, virtual COM port
- Dedicated software tool to control and test radio transceiver
- Support of a wide choice of IDEs including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
ULN2003 Driver Board Stepper Motor-Green
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
ACEBOTT AI Expansion Pack Kit for QD001-QD003
- AI vision expansion kit for the ACEBOTT QD001 Smart Car
- Beginner-friendly setup for kids and AI enthusiasts
- Introduces artificial intelligence and machine vision concepts
- Perfect for early STEM & STEAM education
- Enhances the learning experience of the base smart car kit
Metal Desoldering Pump Semi – Aluminium Alloy Tin Absorber
- Metal body
- High suction power
- Teflon nozzle
- Easily replaceable nozzle
- Easy to clean and maintain
- Sturdy metal rod
- Comes with an innovative Protective case
- Ideal for removing semi–aluminium alloy tin
3-Way Soil Meter For Moisture Light Intensity and pH Testing Meter
- Three different soil test meters in one device; Measures moisture, pH/Acidity, and light.
- Measures moisture, pH/Acidity, and light.
- 100% Accuracy; Easy to read moisture, pH and light levels.
- Compact, portable & easy to use, just plug and use.
- Compact soil meter works indoor/outdoors.
Official Silicon Labs MGM260P-EK2713A xGM260P Explorer Kit (BRD2713A)
- Based on the MGM260PD22VNA2 +10 dBm 2.4 GHz PCB Module
- +10 dBm output power, 3200 kB flash, 512 kB RAM
- Two LEDs and two push buttons
- Reset button
- USB connector for power and debug connection
- On-board SEGGER J-Link debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- Breakout pads for GPIO access and connection to external hardware
- Third-party add-on connectors
- mikroBUS socket
- Qwiic® connector
Official 7Semi EC200U 4G LTE Cat 1 Dongle, GNSS Positioning
- 4G LTE Cat 1 Connectivity: Reliable cellular communication with up to 10 Mbps downlink and 5 Mbps uplink.
- Multi-Network Support: Works with 4G LTE, GSM, and GPRS networks.
- Advanced Module: Powered by the Quectel EC200U-CN for stable performance.
- Multi-GNSS Positioning: Supports GPS, GLONASS, BeiDou, Galileo, and QZSS.
- Multiple Protocols: Supports TCP, UDP, PPP, HTTP, HTTPS, MQTT, FTP, SSL, and more.
- Plug-and-Play USB: Easy connection with laptops, industrial PCs, and embedded systems.
- Wide Compatibility: Supports Windows and Linux operating systems.
- Versatile Applications: Ideal for IoT, industrial automation, remote monitoring, fleet tracking, and cloud communication.
2pin 2.54mm Twist Female to Female Dupont Cable
- Color: Red, Black
- Connector 1: Female Dupont
- Connector 2: Female Dupont
- Insulation Material: PVC
- Length: 20cm
GY- MAX4466 Sound Sensor Module
- Supply Voltage Operation: +2.4V to +5.5V.
- Versions with 5nA Complete Shutdown Available only (MAX4467/MAX4468).
- Excellent Power-Supply Rejection Ratio: 112dB.
- Excellent Common-Mode Rejection Ratio: 126dB.
- High AVOL: 125dB (RL = 100kΩ).
ACEBOTT ESP32 5-DOF Robot Arm Kit Expansion Pack for QD001-QD007
- 5-DOF movement for flexible control
- Works with QD001 smart car
- ESP32-based with Wi-Fi/app/joystick control
- Programmable with memory function
- Limit protection for safe operation
3PIN IR Infrared Flame Detection Sensor Module
- 1.Can detect the flame or the light with the wavelength at the range of 760 nm to 1100 nm.
- 2.The detection angle is about 60 degrees,extremelty sensitive to the flame spectrum.
- 3.Sensitivity is adjustable. (shown in blue digital potentiometer)
- 4.The comparator output with clean signal,good waveform,strong driving ability of more than 15mA.
- 5.With an adjustable precision potentiometer to adjust the sensitivity.
- 6.Operating voltage:3.3V-5V.
- 7.The output form:DO digital switching outputs (0 and 1).
- 8.A fixed bolt hole is set for easy installation.
- 9.Small plates PCB size:3.2cm * 1.4cm.
- 10.Using LM393 comparator with wide voltage.
Texas Instruments LAUNCHXL-F2800137 TMS320F2800137 LaunchPad Development Kit for C2000 Real-Time MCU
-
Based on TI C2000™ F280013x real-time microcontroller
-
Low-cost LaunchPad™ development and evaluation board
-
Standardized and easy-to-use platform
-
Extended version with extra I/O pins
-
Supports two BoosterPack™ plug-in modules
-
Compatible with TI MCU LaunchPad ecosystem
-
Ideal for evaluation, learning, and prototyping
-
Suitable for real-time control applications
-
Supported by TI Code Composer Studio and C2000 libraries
NUCLEO-L053R8 Development Board, STM32 Nucleo-64, STM32L053R8 MCU, Arduino Uno & ST Morpho Connectivity
- Product: STMICROELECTRONICS NUCLEO-L053R8 Development Board
- STM32 microcontroller
- 1 user LED shared with ARDUINO®
- 1 user and 1 reset push-buttons
- 32.768KHz crystal oscillator
Official 7Semi SHT45 Digital Humidity and Temperature Sensor Probe 0.1C Accuracy 1% RH 16bit I2C
- Digital output, I2C interface (I2C address 0x44)
- Fully functional in condensing environment
- Variable power heater
- NIST traceability
- Breatable shell
- Corrosion resistance
- High temperature resistance
- Large air permeability, fast gas humidity flow and exchange rate, uniform divergence.
- Excellent ability of anti-dust, anti-corrosion and waterproof (IP65)
Official PLC010935BP BoosterPack™ plug-in module for solar power line communication reference design
-
PLC BoosterPack Module: Based on TIDA-010935 reference design
-
LaunchPad Compatible: Works with MSPM0G3507 LaunchPad Development Kit
-
PLC Communication: Enables data transfer over power lines
-
Modem IC: Uses THVD8000 with OOK modulation
-
Line Driver: Integrated THS6222 for strong signal output
-
High Performance: Low distortion and reliable communication
-
Easy Integration: Plug-and-play BoosterPack form factor
-
Applications: Ideal for IoT, smart grid, industrial automation, and smart metering
Bluetooth 4.0 NRF51822 Evaluation Kit
- 2.4 GHz multiprotocol RF transceiver
- ARM Cortex-M0 32 bit processor
- 128 bit AES HW encryption
- 256kB flash & 32kB RAM
- Programmable Peripheral Interconnect (PPI)
- 10 bit ADC
Official 7Semi SCD40 CO2, Temperature and Humidity Sensor Breakout I2C
- Photoacoustic CO2 sensor technology (carbon dioxide sensor)
- Integrated temperature and humidity sensor
- Measurement range: 400 ppm – 2000 ppm
- Accuracy: +-(50 ppm + 5 % of reading)
- Current consumption: 17 mA (meas. rate = 5 s) / 0.5 mA (meas. rate = 5 min)
- Fully calibrated and linearized
- I2C digital interface
ESP8266 Serial Wifi Module NodeMcu Lua Wifi V3 (CH340 + 30PIN + Micro)
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
Water Quality Sensor TDS Water Quality Testing Probe
- Input Voltage: 5 V
- measuring range 0-3000PPM,
- Measurement accuracy 2%,
- connector: Plug 1/4″ PE
- Probe Diameter 6.35mm
Official TMDSFSIADAPEVM Fast Serial Interface (FSI) Adapter Board Evaluation Module
-
High-speed communication – Up to 200 Mbps throughput across isolation
-
Low signal count design for cost-effective, reliable data transfer
-
Built into select TI C2000™ Real-Time Control MCUs
-
Enables low-latency, time-critical data exchange between devices
-
Supports decentralized processing, sensing, and actuation
-
Designed to work with isolation devices for hot/cold side communication
-
FSI Adapter Board for easy evaluation and development
-
Integrated isolated power biasing and digital isolation
-
Includes LVDS (high-speed) and RS485 (medium-speed) drivers/receivers
-
Ideal for industrial drives, servo systems, sensing networks, and solar power
