Digi ConnectCore® MP133 STM32MP133C with Arm® Cortex®-A7 Development Kit – 602-CC-WMP133-KIT-ND (included Dev Board)
- Gigabit Ethernet + 10/100 Mbit Ethernet
- (2) USB Host, 1 x USB OTG
- (2) CAN-FD
- MicroSD card
- PCIe minicard with SIM card holder
- MikroE Click boards™ connector
- Console over USB
- Digi XBee (including Digi XBee Cellular support)
- Audio (microphone and headphones)
- User buttons and LEDs
SIM 900A GSM GPRS Modem TTL with Antenna
- The onboard two set power supply interface VCC5 5V power supply, VCC4 interface, 3.5–4.5V power supply, optional power on self starting (default) and control start.
- The onboard SMA (default) and IPX mini antenna interface, SIM900A interface reserved reset.
- The size of the module is 49*50, all the new and original device.
- The computer can give early computer debugging USB module power supply,
a very large amount of data under the condition of the recommended current more than 1A. - Standby dozens of MA data can be set to provide dormancy, dormancy of 10MA low power.
- The serial port circuit: support for 3.3V single chip microcomputer.
NUCLEO-WL33CC2 STM32WL33CC MCU (433MHz) Nucleo-64 Development Board
- Delivered with SMA antenna
- Three user LEDs
- Three user and one reset push-buttons
- Board connectors: USB Type-C®, ARDUINO® Uno V3 expansion connector, ST morpho extension pin headers
- Flexible power-supply options: ST-LINK USB VBUS or external sources
- On-brd STLINK-V3EC debug/programmer w/ USB re-enumeration capability:mass storage, virtual COM port
- Dedicated software tool to control and test radio transceiver
- Support of a wide choice of IDEs including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
MSP-EXP430G2 LaunchPad™ Development Kit – MSP-EXP430G2ET Development Kit
- Base Product Number: MSP430
- Series: MSP430G2
- Platform: LaunchPad
- Type: MCU 16-Bit
- Mounting Type: Socket
TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Mini USB
- Input interface: Mini USB.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.2V.
- Full charge voltage: 4.2V.
- Battery over-current protection: 3 A
- The battery Undervoltage protection: 2.5 V
2WD Mini Round Double-Deck Smart Robot Car Chassis DIY Kit
-
Compact 2WD round double-deck chassis
-
Includes 2 geared BO motors and rubber wheels
-
Made from strong, transparent acrylic plates
-
Ideal for Arduino/Raspberry Pi/ESP32 projects
-
Supports multiple sensors and wireless modules
-
Great for line-followers, obstacle avoiders, and DIY robotics
3PI miniQ Car Kit: wheel Tyre + 12mm N20 Micro Gear Motor + Motor Mount
- For Vehicle Type: Cars
- Material: Plastic
- Use: Vehicles & Remote Control Toys
- Width : 12mm
- Special Note: only for HM N20 series motor
3-6V DC Motor with Wire
- Small size, suitable for toy applications and Arduino projects
- Operates at 5V, making it compatible with common electronic devices
- High-speed motor, suitable for applications requiring fast rotation
- Can handle a rated torque of 29.2 g.cm
- Provides an output power of 3.47W
DC12V N20 Micro Metal Gear Motor Pololu 600rpm 1:50
- Voltage: 12V DC
- Speed: 600 RPM
- Gear Ratio: 1:50
- Motor Type: Micro Metal Gear Motor
- Torque: High torque output suitable for various applications
- Dimensions: Standard N20 motor size, perfect for compact designs
- Weight: Lightweight, facilitating easy integration into projects
N20 Micro Gear 12V 100RPM DC Motor (High Torque)
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
Robot Smart Car DC motor DIY 3-6V Grade A
- Robot Smart Car DC motor DIY 3-6V Grade A
- Voltage Range: 3V to 6V
- Rated Speed: ~150–200 RPM at 6V (varies slightly)
- Motor Type: Brushed DC
- Shaft Diameter: ~2mm
- Body Size: Approx. 55mm x 20mm x 18mm
- Weight: Lightweight and compact
- Material: Metal & durable plastic housing
Robot Smart Car Wheel Tyre Grade B
- Tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Yellow
Robot Smart Car Wheel Tyre Grade A
- Tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Yellow
Longer Version of 4 WD Double Layer Smart Car Chassis Kit
- Very handy and simple in assembling/disassembling.
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
Robot Smart Car Chassis-Black
- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- With a 4 AA battery box (batteries not included).
- It can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
DIY Kits D2- 6 Bluetooth Remote Control Intelligent Car 51 MCU
Product Type:Remote control car kit
Connecting Mode:Blutooth mode
Operating Voltage (V):1.5 V
DIY D2-5 Intelligent Tracing Car Kit (without battery)
- PCB Size:104x72x1.6mm
- Installation dimension:104x72x55mm
- Work Voltage:3V
- Weight: 68 gm
DIY D2-3 Intelligent Tracing Car Kit (without battery)
D2-2 DIY Kit Intelligent Tracking Line Smart Car Suite Kit AT89C2051 51 MCU (without battery)
Product Type:Car kit
Power Supply(V):3.3V
Motor Type:BO motor
DIY D2-1 Intelligent Tracing Car Kit (without battery)
Product Type:Car kit
Motor Type:BO motor
Power Supply(V):3.3V
