AM2320 Digital Temperature & Humidity Sensor
- Standard I2C and 1-Wire bus output (note we have not tried 1-Wire)
- Signal transmission distance up to 20 meters
- I2C interface (address 0x5c)
- 3.3V / 5V tolerant
- 0.1 C / % RH (relative humidity) resolution (+/- 0.5 C, 3% RH)
Digi ConnectCore® MP133 STM32MP133C with Arm® Cortex®-A7 Development Kit – 602-CC-WMP133-KIT-ND (included Dev Board)
- Gigabit Ethernet + 10/100 Mbit Ethernet
- (2) USB Host, 1 x USB OTG
- (2) CAN-FD
- MicroSD card
- PCIe minicard with SIM card holder
- MikroE Click boards™ connector
- Console over USB
- Digi XBee (including Digi XBee Cellular support)
- Audio (microphone and headphones)
- User buttons and LEDs
Official NUCLEO-C051C8 STM32C051C8 Nucleo-64 STM32C0 ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board
- STM32C051C8 MCU – ARM Cortex-M0+ with 64KB Flash.
- On-board ST-LINK – Built-in USB debugger/programmer.
- ARDUINO & ST morpho support – Easy hardware expansion.
- USB or external power – Flexible power supply options.
- STM32Cube & IDE support – Ready-to-use software and tools.
Official 7Semi EC200U-CN LTE 4G GNSS Ultra-compact Nano Modem
-
Official 7Semis 4G LTE USB Nano Modem
-
Powered by Quectel EC200U-CN LTE Cat-1 module
-
Supports LTE-FDD, LTE-TDD, and GSM/GPRS networks
-
Plug-and-play USB connectivity for PC and laptop
-
Ultra-compact size for space-constrained designs
-
Ideal for IoT, M2M, tracking, and industrial applications
-
Includes wide-band 4G LTE antenna (700–2700 MHz)
-
IPEX (u.FL) connector with 3M adhesive mounting
ACEBOTT QA019 ESP32 Max V3.0 with 1m Type-C Cable
- Model: ACEBOTT ESP32 Max V3.0
- Type: Microcontroller board
- Processor: 240 MHz dual-core
- Memory: 520 KB RAM, 4MB flash
- Connectivity: Wi-Fi, Bluetooth LE
Official MSP-EXP430FR2355 – MSP430FR2355 LaunchPad Development Kit
-
Powered by MSP430FR2355 ultra-low-power Value Line MCU
-
Includes 32KB FRAM & 4KB SRAM for flexible memory allocation
-
On-board debug probe for easy programming and energy measurement
-
Features 12-bit ADC, DACs, PGAs & enhanced comparators (eCOMPs)
-
Smart Analog Combo for advanced signal chain prototyping
-
Ambient light sensor & external analog connector included
-
Two user-programmable buttons and two LEDs
-
Ideal for data logging, sensor applications, and low-power systems
-
24MHz operation for faster processing in energy-constrained applications
-
Compatible with TI’s Code Composer Studio™ and IAR Embedded Workbench
ACEBOTT ESP8266 Quadruped Bionic Spider Robot – QD020
- Product type – Programmable Robot Kit
- Brand – ACEBOTT
- Model – QD020
- Robot type – Quadruped Bionic Spider Robot
- Microcontroller – ESP8266
- Programming language – C/C++
- Development platform – Arduino IDE
- Connectivity – WiFi
- Mounting type – Programmable Development Kit
- Application – STEM Education, Robotics and Electronic Projects
ZK-4KX DC Step Up and Step Down Adjustable Voltage Regulator with Dual Display (DC DC Buck Boost Converter CC CV 0.5-30V 4A Adjustable)
- Model: ZK-4KX
- Material: Fiber glass board, Electronic component
- Input Voltage: 5.0-30v
- Output Voltage: 0.5-30v
- Voltage Display resolution: 0.01V
- Current Display resolution: 0.001A
- Conversion Efficiency: about 88%
- Output Power: Natural heat dissipation 35W; Strengthen heat dissipation 50W
- Output Current: It can work stably at 3A for a long time, and can reach 4A under enhanced heat dissipation.
- Soft Start: Yes (The soft start may fail when it starts with high power and load module.)
LAUNCHXL-F2800157 – C2000 MCU F2800157 LaunchPad Development Kit
- Microcontroller: TMS320F2800157
- Clock Speed: 120 MHz
- Debugger: XDS110 Onboard
- Connectivity: USB, GPIO, BoosterPack headers
- Operating Voltage: 3.3V / 5V compatible
Easy-Plug ACEBOTT Smart Home Education Kit – Level 1 (3 in 1 Projects) – QE023
- Brand : ACEBOTT
- Model Number : QE023
- Mounting Type : ESP32 Intelligent Transport Kit for arduino
- Microprocessor : ESP8266
ACEBOTT Bionic Biped Robot Kit for Arduino ESP32 – QD021
- Brand Name : ACEBOTT
- Model Number : QD021
- Category : STEAM & STEM Kit, STEAM & STEM Toy, Robot Kit
- Type : Bionic Biped Robot Kit
- Recommended Age : For Age 12+ & Makers
- Application : Scientific & Educational Toys, Home STEAM & STEM Education, Classroom STEAM & STEM Education
- Controller Boards : ESP32
- Programming Arduino, ACECode
USB ASP AVR Programmer for ATMEL Processors
The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers. This ATMEL Processors simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver; no special USB controller is needed.
1×40 Pin Right Angle Pin Header 2.54mm
- Single row.
- 2.54mm pitch.
- 1 x 40 pins.
- Through-hole mount.
- 17mm pin length.
ACEBOTT Intelligent Transport Education Kit – Level 1 (XH2.54) – QE027
- Brand Name: ACEBOTT
- Model Number: QE027
- Mounting Type: ESP32 Intelligent Transport Kit for Arduino
- It is a “4 in 1” learning kit, this kit only has one controller board, so Users can assemble one of these 4 projects at each time.
Mini 4-Channel Motor Drive Shield Expansion Board L293D Module High Voltage Current Module for R3 MEGA 2560 MEGA2560
- New L293D motor shield, the input voltage DC4.5-25V
- 600mA output current capability per channel
- 1.2A peak output current(non-repetitive) per channel
- Enable facility
- Overtemperature protection
- Logical “0” input voltage up to 1.5V(High noise immunity)
AS608 Fingerprint Reader Sensor Module Optical Fingerprint Fingerprint Module
- Resolution: 500dpi
- Supply current: <60mA
- Supply voltage: 3.3V
- Fingerprint image entry time: <1.0 seconds
- Peak current: <60mA
NUCLEO-U083RC STM32U083RC MCU STM32 Nucleo-64 Development Board
- Targeted STM32U083RCT6 ultra-low-power Arm Cortex-M0+ MCU in LQFP64 package
- USB Type-C® connector
- Cryptography
- 1 user LED shared with ARDUINO, 1 user and 1 reset push-buttons
- 32.768KHz crystal oscillator
- Flexible power-supply options: ST-LINK USB VBUS or external sources
Official 7Semi DC-DC Buck Converter 5V 3A Out – MP2338
-
5V Regulated DC Output
-
Up to 3A Output Current
-
Based on MP2338 Buck Regulator IC
-
Input Voltage up to ~24V
-
High Efficiency Switching Design
-
Thermal Shutdown Protection
-
Cycle-by-Cycle Current Limiting
-
Compact Breakout Board
-
Easy Breadboard & PCB Integration
-
Ideal for Microcontrollers & Sensors
Official 7Semi DS18B20 Digital Waterproof Temperature Sensor Probe 3M Cable
-
7Semi DS18B20 digital waterproof temperature sensor probe
-
3-meter insulated cable for flexible installation
-
Measures temperature from −55°C to +125°C
-
±0.5°C accuracy for precise monitoring
-
1-Wire digital interface for easy integration
-
Compatible with Arduino, Raspberry Pi, ESP8266, ESP32
-
Stainless steel probe for durability and corrosion resistance
-
Suitable for liquids, outdoor, HVAC, and industrial use
DIY Kits D2- 6 Bluetooth Remote Control Intelligent Car 51 MCU
Product Type:Remote control car kit
Connecting Mode:Blutooth mode
Operating Voltage (V):1.5 V
