ACEBOTT ESP32 Cam Module Pack Smart Car Expansion DIY kit For QD001-QD002
- Robot Camera: Sees & streams.
- Image Recognition.
- Easy Setup.
- Enhanced Robot.
NUCLEO-WL33CC2 STM32WL33CC MCU (433MHz) Nucleo-64 Development Board
- Delivered with SMA antenna
- Three user LEDs
- Three user and one reset push-buttons
- Board connectors: USB Type-C®, ARDUINO® Uno V3 expansion connector, ST morpho extension pin headers
- Flexible power-supply options: ST-LINK USB VBUS or external sources
- On-brd STLINK-V3EC debug/programmer w/ USB re-enumeration capability:mass storage, virtual COM port
- Dedicated software tool to control and test radio transceiver
- Support of a wide choice of IDEs including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
Official BME690 Digital Sensor Nano Breakout 2.54mm – Temperature, Humidity, Pressure, Gas | I2C
-
Measures temperature, humidity, pressure, and gas (VOC/VSC)
-
Powered by Bosch Sensortec BME690 sensor
-
Supports Bosch BSEC software for advanced air-quality processing
-
I²C interface for easy microcontroller integration
-
3.3 V operating voltage
-
Low-power design for battery-powered applications
-
Standard 2.54 mm pin pitch for breadboard compatibility
-
Compact and rugged breakout design
-
Ideal for IoT, smart home, HVAC, and air-quality monitoring
ST Link V2 Programmer For STM8 and STM32 (Random Colour)
- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
- Interface definition directly marked on the shell, clear, convenient and practical!
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
ULN2003 Driver Board Stepper Motor-Green
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
3-Way Soil Meter For Moisture Light Intensity and pH Testing Meter
- Three different soil test meters in one device; Measures moisture, pH/Acidity, and light.
- Measures moisture, pH/Acidity, and light.
- 100% Accuracy; Easy to read moisture, pH and light levels.
- Compact, portable & easy to use, just plug and use.
- Compact soil meter works indoor/outdoors.
Official Silicon Labs MGM260P-EK2713A xGM260P Explorer Kit (BRD2713A)
- Based on the MGM260PD22VNA2 +10 dBm 2.4 GHz PCB Module
- +10 dBm output power, 3200 kB flash, 512 kB RAM
- Two LEDs and two push buttons
- Reset button
- USB connector for power and debug connection
- On-board SEGGER J-Link debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- Breakout pads for GPIO access and connection to external hardware
- Third-party add-on connectors
- mikroBUS socket
- Qwiic® connector
ACEBOTT AI Expansion Pack Kit for QD001-QD003
- AI vision expansion kit for the ACEBOTT QD001 Smart Car
- Beginner-friendly setup for kids and AI enthusiasts
- Introduces artificial intelligence and machine vision concepts
- Perfect for early STEM & STEAM education
- Enhances the learning experience of the base smart car kit
Metal Desoldering Pump Semi – Aluminium Alloy Tin Absorber
- Metal body
- High suction power
- Teflon nozzle
- Easily replaceable nozzle
- Easy to clean and maintain
- Sturdy metal rod
- Comes with an innovative Protective case
- Ideal for removing semi–aluminium alloy tin
Official 7Semi EC200U 4G LTE Cat 1 Dongle, GNSS Positioning
- 4G LTE Cat 1 Connectivity: Reliable cellular communication with up to 10 Mbps downlink and 5 Mbps uplink.
- Multi-Network Support: Works with 4G LTE, GSM, and GPRS networks.
- Advanced Module: Powered by the Quectel EC200U-CN for stable performance.
- Multi-GNSS Positioning: Supports GPS, GLONASS, BeiDou, Galileo, and QZSS.
- Multiple Protocols: Supports TCP, UDP, PPP, HTTP, HTTPS, MQTT, FTP, SSL, and more.
- Plug-and-Play USB: Easy connection with laptops, industrial PCs, and embedded systems.
- Wide Compatibility: Supports Windows and Linux operating systems.
- Versatile Applications: Ideal for IoT, industrial automation, remote monitoring, fleet tracking, and cloud communication.
2pin 2.54mm Twist Female to Female Dupont Cable
- Color: Red, Black
- Connector 1: Female Dupont
- Connector 2: Female Dupont
- Insulation Material: PVC
- Length: 20cm
GY- MAX4466 Sound Sensor Module
- Supply Voltage Operation: +2.4V to +5.5V.
- Versions with 5nA Complete Shutdown Available only (MAX4467/MAX4468).
- Excellent Power-Supply Rejection Ratio: 112dB.
- Excellent Common-Mode Rejection Ratio: 126dB.
- High AVOL: 125dB (RL = 100kΩ).
ACEBOTT ESP32 5-DOF Robot Arm Kit Expansion Pack for QD001-QD007
- 5-DOF movement for flexible control
- Works with QD001 smart car
- ESP32-based with Wi-Fi/app/joystick control
- Programmable with memory function
- Limit protection for safe operation
3PIN IR Infrared Flame Detection Sensor Module
- 1.Can detect the flame or the light with the wavelength at the range of 760 nm to 1100 nm.
- 2.The detection angle is about 60 degrees,extremelty sensitive to the flame spectrum.
- 3.Sensitivity is adjustable. (shown in blue digital potentiometer)
- 4.The comparator output with clean signal,good waveform,strong driving ability of more than 15mA.
- 5.With an adjustable precision potentiometer to adjust the sensitivity.
- 6.Operating voltage:3.3V-5V.
- 7.The output form:DO digital switching outputs (0 and 1).
- 8.A fixed bolt hole is set for easy installation.
- 9.Small plates PCB size:3.2cm * 1.4cm.
- 10.Using LM393 comparator with wide voltage.
Texas Instruments LAUNCHXL-F2800137 TMS320F2800137 LaunchPad Development Kit for C2000 Real-Time MCU
-
Based on TI C2000™ F280013x real-time microcontroller
-
Low-cost LaunchPad™ development and evaluation board
-
Standardized and easy-to-use platform
-
Extended version with extra I/O pins
-
Supports two BoosterPack™ plug-in modules
-
Compatible with TI MCU LaunchPad ecosystem
-
Ideal for evaluation, learning, and prototyping
-
Suitable for real-time control applications
-
Supported by TI Code Composer Studio and C2000 libraries
NUCLEO-L053R8 Development Board, STM32 Nucleo-64, STM32L053R8 MCU, Arduino Uno & ST Morpho Connectivity
- Product: STMICROELECTRONICS NUCLEO-L053R8 Development Board
- STM32 microcontroller
- 1 user LED shared with ARDUINO®
- 1 user and 1 reset push-buttons
- 32.768KHz crystal oscillator
NUCLEO-WL33CC1 STM32WL33CC MCU (868/915MHz) Nucleo-64 Development Board
- Front end optimized for 826‑958 MHz high band at 16 dBm
- Ultra low power MCU
- Low power autonomous wake-up receiver
- Delivered with SMA antenna
- Three user LEDs
- Three user and one reset push-buttons
- Board connectors are USB Type C and ARDUINO Uno V3 expansion connector and ST morpho extension pin headers for full access to all MCU I/Os
- Flexible power supply options via ST LINK USB VBUS or external sources
- Dedicated software tool to control and test radio transceiver
ACEBOTT Handle Expansion Pack for QD001-QD010
- Wireless Bluetooth control optimized for QD001 smart robot car
- Dual 360° joysticks with responsive buttons
- Bright LED indicators for connection and battery status
- Compatible with ESP32 and ACECode programming environments
- Ergonomic design for comfortable grip during extended use
- Rechargeable battery with long-lasting runtime
Texas Instruments LAUNCHXL2-TMS57012 Hercules TMS570LS12x LaunchPad Development Kit
-
Low-cost LaunchPad™ development kit from Texas Instruments
-
Based on TMS570LS1224 safety-certified MCU
-
ARM® Cortex-R4F lockstep core architecture
-
IEC 61508 SIL 3 and ISO 26262 ASIL D certified
-
Designed for safety-critical applications
-
Integrated safety diagnostics and peripherals
-
On-board emulator for programming and debugging
-
Built-in LEDs, push buttons, and ambient light sensor
-
Supports BoosterPack™ expansion modules
-
Ideal for evaluation, learning, and prototyping
Easy-Plug ACEBOTT ESP32 Smart Home Starter Kit Wooden House IoT Wifi APP (Luxury Version) with Story based Tutorial – QE001
- Model: QE001
- Controller: ESP32
- Connectivity: Wi-Fi, Bluetooth
- Programming Languages: Arduino, ACECode
