400 Points Solderless Breadboard (PP Material)
- 400 tie points
- 2 Power lanes, Total 100 tie points in power lanes
- 1 Double strip, Total 300 tie points
- Perfect for Arduino shield prototyping and testing
- Plastic housing, metal contact clips
Official 7Semi ESP32-DEVKIT-E ESP32 Wifi BLE Development Board
-
Dual-core ESP32 processor running at up to 160 MHz
-
Integrated WiFi and Bluetooth connectivity
-
Supports power via Micro USB, 5V input, or 3.3V supply
-
Onboard CP2102 USB-to-TTL adapter for programming and debugging
-
Breadboard-compatible form factor with standard pin headers
ACS712 20A Range Current Sensor Module
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
Texas Instruments LP-MSPM0G3507 — MSPM0G3507 LaunchPad™ development kit for 80-MHz Arm® Cortex®-M0+ MCU
- MSPM0G3507 LaunchPad Development Kit from Texas Instruments
- EnergyTrace technology available for ultra-low-power debugging
- External OPA2365 (default buffer mode) for ADC (up to 4 Msps) evaluation
- Onboard 32.768kHz and 40MHz crystals | RC filter for ADC input (unpopulated by default)
- Temperature sensor circuit | Light sensor circuit
- Onboard XDS110 debug probe
- 2 buttons, 1 LED and 1 RGB LED for user interaction
NUCLEO-L011K4 Development Board, STM32 Nucleo-32, STM32L011K4 MCU Eval Board, On Board Debugger, Arduino Nano Extension, Reset Push Button
- Product: NUCLEO-L011K4 Development Board
- Core Architecture: ARM
- Extension with Arduino™ nano connectivity
- Core Sub-Architecture: Cortex-M0+
- Silicon Family Name: STM32L0
- Silicon Core Number: STM32L011K4
- Silicon Manufacturer: STMicroelectronics
Official LAUNCHXL-F28027F C2000 Piccolo MCU F28027F LaunchPad™ Development Kit
-
Low-cost evaluation and development board for InstaSPIN-FOC enabled F2802x series MCUs
-
Part of the Texas Instruments LaunchPad™ ecosystem – compact, standardized, and easy-to-use
-
Powered by C2000 Piccolo F28027F MCU for high-performance real-time motor control
-
Supports InstaSPIN-FOC technology for efficient field-oriented motor control without detailed motor parameters
-
Compatible with TI BoosterPacks for quick prototyping and functionality expansion
-
Integrated on-board emulator for programming and debugging
-
Provides GPIO access and standard connectors for external peripherals
-
Backed by MotorWare software tools for simplified development and faster time-to-market
-
Ideal for motor drives, robotics, digital power supplies, renewable energy systems, and embedded control applications
GY-51 LSM303DLH module 3-axis magnetic field acceleration
- Model: GY-51 LSM303DLH
- 12 Bit A/D Converter
- 3-5VDC Power Supply
- I2C Communication Interface
- 16 Bit Data Output
Raspberry Pi 5MP Camera R1.3 Module with Cable
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
- Fully Compatible with Raspberry Pi 3 and 4 Model B
- Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
Official 7Semi ESP32-S3-Dev-BoardC-1-N8R2 WiFi, Bluetooth, Dual USB-C, RGB LED
-
SoC ESP32-S3-WROOM-1 (Dual-core Xtensa® LX7)
-
Wireless Wi-Fi 2.4 GHz and Bluetooth 5 LE
-
RAM / Flash 2MB PSRAM and 8MB Flash
-
USB Ports 2 × USB-C (OTG and JTAG/Serial)
-
Interfaces I2C, SPI, UART, ADC, PWM, CAN (TWAI®), GPIO
-
Operating Voltage 3.3V logic with 5V via USB input
-
RGB LED SK6812
-
Power Modes Active, Modem-sleep, Light-sleep, Deep-sleep
-
Sleep Current approximately 7 µA in deep-sleep mode
-
Development Environment Arduino, ESP-IDF, PlatformIO
-
Boot Button Download button; hold Boot and press Reset to enter firmware download mode via serial
-
Reset Button Press to restart the system
Official 7Semi TPS61023 3.7A 5V Out Mini Boost Converter
-
5V Fixed Output Boost Converter
-
Up to 3.7A Output Current
-
Wide Input Voltage: 1.5V–5.5V
-
Based on TI TPS61023 IC
-
High Efficiency up to 94%
-
1 MHz Switching Frequency
-
Compact Mini Breakout Board
-
Built-In Overvoltage Protection
-
Thermal Shutdown & Short-Circuit Protection
-
Ideal for Battery & Portable Applications
4pin Thermal Thermistor Temperature Sensor Module
- Using the NTC thermistor sensor, good sensitivity.
- The comparator output signal clean waveform is good, driving ability than 15mA.
- With bolt holes for easy installation.
- Adjust the temperature distribution bit detection threshold.
- Working voltage 3.3V-5V.
- The output format: Digital switching output (0 and 1).
- Using a wide voltage LM393 comparator.
SG90 Continuous Rotation 360 Degree Servo Motor For Arduino Robotics RC Car DIY Projects
- Item Type: TowerPro Servo Motor
- Model Series: SG Series
- Rotation: 360Degree
- Torque Rating: 1.2kg-cm
- Model No: SG90
- Operating Voltage: 3.0 ~ 7.2VDC
- Operating Speed @4.8V: 0.12sec/60°
5V Photosensitive diode relay module
- Trigger Voltage: 5VDC
- Switching Voltage: 250VAC@10A; 30VDC@10A
- Photosensitive Relay Module
- Onboard Multiturn Potentiometer to Control Brightness Detection Value
MSP-EXP430G2 LaunchPad™ Development Kit – MSP-EXP430G2ET Development Kit
- Base Product Number: MSP430
- Series: MSP430G2
- Platform: LaunchPad
- Type: MCU 16-Bit
- Mounting Type: Socket
Official 7Semi DC-DC Buck Converter 14V-30V Input to 12V 3A Output – AP63300
-
Input voltage range: 14V to 30V
-
Regulated 12V output up to 3A
-
Based on AP63300 synchronous buck converter
-
Low EMI with Frequency Spread Spectrum (FSS)
-
Integrated high-side and low-side MOSFETs
-
Ultra-low 22µA quiescent current
-
Compact design with minimal external components
-
Ideal for industrial, automotive, and embedded use
DIY D2-5 Intelligent Tracing Car Kit (without battery)
- PCB Size:104x72x1.6mm
- Installation dimension:104x72x55mm
- Work Voltage:3V
- Weight: 68 gm
AT24C256 I2C Interface EEPROM Memory Module
- Chipset : AT24C256.
- Operating Temperature: -55°C to 125°C.
- Storage Temperature: -65°C to 150°C.
- The voltage on Any Pin with respect to the ground: -1.0V to 6.25V.
- Maximum Operating Voltage: 6.25V DC.
Arduino leonardo R3 ATMEGA32U4 Board
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Input Voltage (Recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
GPS NEO-7M Satellite Positioning Module Development Board for Arduino STM32 51(with Battery)
- On-board with ceramic antenna,
- Welded with an SMA head
- Reserved serial port interface
- Comes with a signal indicator
Official 7Semi ESP32-DEVKIT-D ESP32 Wifi BLE Development Board
- Dual-core ESP32-WROOM-32D module with built-in WiFi + Bluetooth
- USB-C port for easy powering and programming
- CP2102 USB-to-UART bridge for reliable communication
- Multiple GPIOs for sensors, displays, and automation modules
- Perfect for IoT, home automation, robotics, and rapid prototyping
