Infrared Inspection Module Obstacle Avoidance
- There is an obstacle, the green indicator light on the circuit board
- Detection distance: 2 ~ 30cm
- Detection angle: 35 °
- Comparator chip: LM393
- 3mm screw holes for easy mounting
Texas Instruments LAUNCHXL-F28379D – C2000 Delfino MCUs F28379D LaunchPad Development Kit
-
Low-cost development kit for TMS320F2837xD, F2837xS, and F2807x microcontrollers
-
Part of TI’s C2000™ MCU LaunchPad™ ecosystem
-
Supports connection of two BoosterPack™ plug-in modules
-
Features powerful dual-core ARM Cortex-M4F architecture
-
Integrated on-board USB JTAG emulator for programming and debugging
-
Ideal for real-time control, motor control, industrial automation, and power electronics
-
Enables rapid prototyping with standardized headers and expansion options
-
Compatible with Code Composer Studio and other TI tools
Official Texas Instruments LP-MSPM0G3519 LaunchPad™ Development Kit for 80MHz Arm® Cortex®-M0+ MCU
-
Based on MSPM0G3519 Arm® Cortex-M0+ MCU
-
On-board debug probe for programming, debugging & energy measurement
-
Includes 3 user buttons and 2 LEDs (1 RGB LED)
-
Access to 80+ I/O pins for expansion and prototyping
-
ADC & DAC low-pass filter placeholders for improved analog performance
-
External reference options available on the back of the board
-
Fully supported by TI software ecosystem (Code Composer Studio™, drivers, examples)
-
Ideal for IoT, sensor-based projects, industrial and low-power applications
Texas Instruments LAUNCHXL-F28P65X C2000 Real-Time MCU F28P65x LaunchPad Development Kit
- On-board XDS110 debug probe for real-time debug and flash programming
- 80-pin LaunchPad leveraging the BoosterPack ecosystem
- Power domain isolation for real-time debug and flash programming
- On-board CAN transceiver and connector
- EtherCAT PHYs and RJ45 connectors
- Two encoder interface (eQEP) connectors
MAX6675 Thermocouple Sensor Module
- High impedance differential inputs.
- Thermocouple break detection.
- 2000V of ESD signal.
- Embedded thermocouple break detection circuitry.
- Compatible with K-type temperature probe
- Simple SPI serial output temperature.
HC-42 Bluetooth Module 5.0BLE Serial Port Module (6-Pin)
- Part Number: HC-42D
- Version: BLE 5.0
- Frequency Band: 2.4G
- Air Rate: 1Mbps/2Mbps
- Working Voltage: 1.8~3.6V
- Antenna: PCB internal antenna
STM32F407G-DISC1 Discovery Board with STM32F407VG MCU – MB997D
-
STM32F407VGT6 featuring 32-bit ARM Cortex -M4 with FPU core, 1-Mbyte Flash, 192-Kbyte RAM
-
On-board ST-LINK/V2 on STM32F407G-DISC1
-
USB ST-LINK with re-enumeration capability and three different interfaces:
-
Debug port
-
Virtual Com port
-
Mass storage
-
-
Board power supply: through USB bus or from an external 5 V supply voltage
Unsoldered ESP32-S3 WiFi Bluetooth compatible BLE 5.0 Mesh Development Board N16R8
- Chip: ESP32-S3
- Flash: 16 MB
- PSRAM: 8 MB
- Dimensions: Approx. 63.5mm x 28.5 mm
- Logic Level Voltage: 3.3V
DHT22 Digital Temperature and Humidity Sensor Module
- Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
- Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
- Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
- Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
Texas Instruments LAUNCHXL-F280025C F280025C LaunchPad development kit
-
Based on TI C2000™ F28002x real-time microcontroller
-
Low-cost LaunchPad™ development and evaluation board
-
Designed for real-time control applications
-
Extended version with additional I/O pins
-
Supports connection of two BoosterPack™ plug-in modules
-
Compatible with the TI MCU LaunchPad ecosystem
MSP-EXP430F5529LP MSP430F5529 USB LaunchPad Evaluation Board
- USB 2.0-enabled MSP430F5529 16-bit MCU
- Up to 25 MHz
- 128KB Flash and 8KB RAM
- 12 Bit SAR ADC
- Various USB device class examples and embedded software libraries available (CDC, HID, MSC)
- eZ-FET lite: Open source onboard debugger with application UART
- One USB connection for emulator and target via the use of an onboard USB hub
- USB as power source: 5V and 3.3V through a high efficiency DC/DC converter
- 40 pin LaunchPad standard leveraging the BoosterPack ecosystem
