Official Silicon Labs XG22-EK2710A EFR32MG22E Explorer Kit (BRD2710A)
Original price was: ₹5,999.00.₹2,999.00Current price is: ₹2,999.00. (Excl. 18% GST)
Price (Excl. GST): ₹2,999.00
Price (Incl. GST): ₹3,538.82
- Based on EFR32MG22E224F512IM40 2.4 GHz Wireless SoC
- +6 dBm, 512 kB Flash, 32 kB RAM, QFN48
- Two LEDs and two push buttons
- Reset button
- USB connector for power and debug connection
- On-board SEGGER J-Link debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- Breakout pads for GPIO access and connection to external hardware
- Third-party add-on connectors
- mikroBUS™ socket
- Qwiic® connector
| Weight | 100 g |
|---|---|
| Dimensions | 240 × 120 × 50 mm |
4 in stock
50 in stock
Please note that the product information provided on our website may not be entirely accurate as it is collected from various sources on the web. While we strive to provide the most up-to-date information possible, we cannot guarantee its accuracy. We recommend that you always read the product labels, warnings, and directions before using any product. Product Images are shown for illustrative purposes only and may differ from the actual product.
The XG22-EK2710A EFR32MG22E Explorer Kit is an ultra-low cost, small form factor development and evaluation platform for the EFR32MG22E Wireless Gecko System-on-Chip. The EFR32xG22E Explorer Kit is focused on rapid prototyping and concept creation of IoT applications. It is designed around the EFR32MG22E SoC, which is an ideal device family for developing energy-friendly connected IoT applications. The kit features a USB interface, an on-board SEGGER J-Link debugger, one user-LED and button, and support for hardware add-on boards via a mikroBus socket and a Qwiic connector. The hardware add-on support allows developers to create and prototype applications using a virtually endless combination of off-the-shelf boards from MIKROE, SparkFun, Adafruit, and Seeed Studio.
The EFR32xG22E Explorer Kit has been designed to inspire customers to make IoT devices with the Silicon Labs EFR32MG22E Wireless Gecko System-on-Chip. The kit includes a mikroBUS™ socket and Qwiic® connector, allowing users to add features to the kit with
a large selection of off-the-shelf boards.
Programming the EFR32xG22E Explorer Kit is easily done using a USB Micro-B cable and the on-board J-Link debugger. A USB virtual
COM port provides a serial connection to the target application, and the Packet Trace Interface (PTI) offers invaluable debug information about transmitted and received packets in wireless links. The EFR32xG22E Explorer Kit is supported in Simplicity Studio™ and a Board Support Package (BSP) is provided to give application developers a flying start.
Connecting external hardware to the EFR32xG22E Explorer Kit can be done using the 20 breakout pads which present peripherals from the EFR32MG22E Wireless Gecko such as I 2C, SPI, UART and GPIOs. The mikroBUS socket allows inserting mikroBUS add-on boards which interface with the EFR32MG22E through SPI, UART or I 2C. The Qwiic connector can be used to connect hardware from the Qwiic Connect System through I2C.
TARGET DEVICE
- EFR32MG22E Wireless Gecko Systemon-Chip (EFR32MG22E224F512IM40)
- High-performance 2.4 GHz radio
- 32-bit ARM® Cortex®-M33 with 76.8 MHz maximum operating frequency
- 512 kB flash and 32 kB RAM
KIT FEATURES
- User LED and push button
- 20-pin 2.54 mm breakout pads
- mikroBUS™ socket
- Qwiic® connector
- SEGGER J-Link on-board debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- USB-powered
SOFTWARE SUPPORT
- Simplicity Studio™
Kit Hardware Layout
Documents
Package Includes
1x EFR32xG22E Explorer Dev Kit board (BRD2710A)
Leave a Reply