3.5 inch SPI TFT Screen Display Module Interface 480*320 without Touch
SKU:
DIS0013
Original price was: ₹1,439.83.₹846.61Current price is: ₹846.61. (Excl. 18% GST)
- TFT Display
- 320×480 Pixel
- ILI9488
- SPI based Operation (other protocol can be configured)
- Clear contrast and Output
- Has SD card slot
3.5 inch SPI Touch Screen Module TFT Interface 480*320 with Touch
SKU:
DIS0012
Original price was: ₹1,863.56.₹1,185.59Current price is: ₹1,185.59. (Excl. 18% GST)
Official CYUSB3KIT-004 Cypress Semiconductor CYUSB301x EZ-USB FX3™ USB 3.0 Host/Controller Interface Evaluation Board
SKU:
DEV0128
Original price was: ₹24,999.00.₹17,202.54Current price is: ₹17,202.54. (Excl. 18% GST)
Official CYUSB3KIT-003 Cypress Semiconductor CYUSB301x EZ-USB FX3™ USB 3.0 Host/Controller Interface Evaluation Board
SKU:
DEV0127
Original price was: ₹14,999.00.₹8,685.59Current price is: ₹8,685.59. (Excl. 18% GST)
-
USB 3.0 Dev Kit: Enables quick evaluation of SuperSpeed USB functionality.
-
EZ-USB FX3 Controller: Built on the CYUSB301x USB 3.0 peripheral family.
-
ARM9 + 512 KB RAM: Supports flexible, high-performance firmware development.
-
GPIF II Interface: Connects easily to FPGAs, processors, ASICs, and image sensors.
-
Up to 5 Gbps Speed: Ideal for high-bandwidth data applications.
-
Complete Software Support: Includes FX3 SDK, drivers, and examples.
-
Easy Prototyping: Onboard debug and accessible I/O for fast development.
-
Affordable Solution: Cost-effective USB 3.0 integration platform.
T856-C Power Bank Charging Circuit Module (5V USB Step Up Type C Charging Module)
SKU:
POW0026
Original price was: ₹99.00.₹24.58Current price is: ₹24.58. (Excl. 18% GST)
- Input Voltage: 3. 7V~5. 5V
- Output voltage: 5V, BAT Discharging Stop Voltage: 2. 9V
- Discharging Efficiency: 85%(input 3. 7V output 5V/1A)
- Charging Interface: C-Type USB port
- Under Voltage Protection
GPS NEO-M8N Satellite Positioning Module Development Board for Arduino STM32 51(with Battery)
SKU:
SEN0197-5
Original price was: ₹1,999.00.₹897.46Current price is: ₹897.46. (Excl. 18% GST)
- Model: NEO M8N GPS Module
- Default baud rate: 9600.
- Supply Voltage: 3V to 5V
- Antenna size 25*25mm
- Module size 25mm*35mm
- Mounting aperture 3mm
GPS NEO-7M Satellite Positioning Module Development Board for Arduino STM32 51(with Battery)
SKU:
SEN0197-4
Original price was: ₹699.00.₹457.63Current price is: ₹457.63. (Excl. 18% GST)
- On-board with ceramic antenna,
- Welded with an SMA head
- Reserved serial port interface
- Comes with a signal indicator
GPS NEO-6M Satellite Positioning Module Development Board for Arduino STM32 51(with Battery)
SKU:
SEN0197-3
Original price was: ₹599.00.₹372.03Current price is: ₹372.03. (Excl. 18% GST)
- Product: GPS NEO-6M Satellite Positioning Module Development Board for Arduino STM32 51
- 5Hz position update rate
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
Official NUCLEO-C092RC Development Board, STM32 Nucleo-64, STM32C092RC MCU Eval Board
SKU:
DEV0126
Original price was: ₹2,499.00.₹1,439.83Current price is: ₹1,439.83. (Excl. 18% GST)
- External SMPS to generate Vcore logic supply
- 24 MHz or 48 MHz HSE
- External SMPS experimentation dedicated connector
- Micro-B or Mini-B USB connector for the ST-LINK
- MIPI® debug connector
Official NUCLEO-8L152R8 Development Board, STM32 Nucleo-64, STM8L152R8 MCU Eval Board, On Board Debugger, Arduino Nano Extension, Reset Push Button
SKU:
DEV0125
Original price was: ₹3,499.00.₹1,694.07Current price is: ₹1,694.07. (Excl. 18% GST)
-
Microcontroller: STM8L152R8 MCU in LQFP64 package
-
Development Board Type: STM8 Nucleo-64
-
Connectivity: Arduino™ Uno V3 compatible and ST morpho headers
-
Power Efficiency: Low-power STM8 microcontroller suitable for energy-sensitive applications
-
Prototyping: Affordable and flexible platform for rapid development and experimentation
-
Expansion: Supports a wide range of shields, sensors, and modules for added functionality
-
Ease of Use: Open development platform with access to STM8 software libraries and firmware examples
-
Applications: Ideal for IoT devices, smart gadgets, educational projects, and embedded system prototyping
Official NUCLEO-C051C8 STM32C051C8 Nucleo-64 STM32C0 ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board
SKU:
DEV0056
Original price was: ₹6,499.00.₹2,634.75Current price is: ₹2,634.75. (Excl. 18% GST)
- STM32C051C8 MCU – ARM Cortex-M0+ with 64KB Flash.
- On-board ST-LINK – Built-in USB debugger/programmer.
- ARDUINO & ST morpho support – Easy hardware expansion.
- USB or external power – Flexible power supply options.
- STM32Cube & IDE support – Ready-to-use software and tools.
STMicroelectronics NUCLEO-N657X0-Q STM32 Nucleo-144 Development Board
SKU:
DEV0055
Original price was: ₹9,999.00.₹6,609.32Current price is: ₹6,609.32. (Excl. 18% GST)
- Brand: STMicroelectronics
- Type: MCU 32-Bit
- Core Processor: ARM Cortex-M55
- Mounting Type: Fixed
- Interconnect System: Arduino R3 Shield, ST Morpho, ST Zio
AI-01 Small Intelligent AI Voice Dialogue Module Kit with ESP32 Development Board Including Microphone and Speaker
SKU:
DEV0038
Original price was: ₹1,238.40.₹551.00Current price is: ₹551.00. (Excl. 18% GST)
- Supports up to 50 offline voice commands
- Built-in ESP32-C2 WiFi chip with RISC-V core
- Integrates with large language models
- Expandable via rich hardware interfaces
- Includes mic, speaker, and pin headers
- Ideal for IoT, automation, and AI prototyping
3M GPS GLONASS GNSS Antenna with SMA Male Connector
SKU:
SEN0197-2
Original price was: ₹399.00.₹211.02Current price is: ₹211.02. (Excl. 18% GST)
- The antenna assembly consists of a patch antenna for receiving GNSS signals and a preamplifier for signal amplification.
- Power supply to the antenna preamplifier must be provided by the application on the same RF signal trace as the GNSS RF signal is carried to the application.
- The antenna has an internal magnet so that it can be fixed on a metallic surface.
- Easy to use an antenna. Does not require RF or antenna knowledge.
50CM SMA Female to U.FL/IPX Interface Cable
SKU:
SEN0197-1
Original price was: ₹149.00.₹66.95Current price is: ₹66.95. (Excl. 18% GST)
- 20 inches/ 50cm lengths of M.2(NGFF) U.FL to RP-SMA antenna connector adapter cable. Extra thick (1.11mm) coaxial pigtail Cable.
- Note: be used for M.2 (NGFF) Interface. Cannot be used for MINI PCI-E interface
Official Arduino UNO EK (एक) R4 Minima ABX00080_IN – Made in India
SKU:
DEV0033-1
Original price was: ₹1,399.00.₹998.00Current price is: ₹998.00. (Excl. 18% GST)
- Official Arduino UNO EK (एक) R4 Minima – Made in India
- Powered by Renesas RA4M1 Arm® Cortex®-M4 32-bit processor @ 48MHz
- 14 digital I/O pins (6 PWM outputs) and 6 analog inputs
- 5V logic compatibility for seamless integration with existing shields and sensors
- USB-C connector for faster programming and communication
- Increased memory and performance for complex projects
- Fully compatible with Arduino IDE and existing UNO shields
- Made in India for local manufacturing and accessibility
Official Arduino UNO Q Single Board Computer ABX00162(2GB RAM 16GB eMMC)
SKU:
DEV0033
Original price was: ₹6,999.00.₹4,152.00Current price is: ₹4,152.00. (Excl. 18% GST)
- Processor: Qualcomm Dragonwing QRB2210
- Microcontroller (MCU): STM32U585
- RAM/Storage: 2GB/16GB
- Connectivity: Wi-Fi 5, BT 5.1
- Debian OS : Linux & Zephyr
SanDisk Micro SD Memory Card 16GB, Class-10
SKU:
MEM0007
Original price was: ₹599.00.₹388.98Current price is: ₹388.98. (Excl. 18% GST)
- Memory Size : 16 Gigabyte
- Card Type : Micro SD
- Data transfer Speed : up to 98MB/s
- Class : 10
LM2577S+LM2596S Automatic Buck-Boost Power Module (Solar Energy Step-down and Step- up Module) (RED)
SKU:
POW0025
Original price was: ₹499.00.₹269.00Current price is: ₹269.00. (Excl. 18% GST)
- Input : 3.5-28 Volts.
- Output : 1.25 Volts – 26 Volts.
- Output voltage independent of input voltage (3.5V-28V input, any value output 1.25V-26V).
- Maximum input current 3 Ampere.
- Maximum output 3 Ampere.
- Rated input 1 Ampere, Output 1 Ampere.
- Size : 5.2cm x 3.8cm x 2cm
ZK-4KX DC Step Up and Step Down Adjustable Voltage Regulator with Dual Display (DC DC Buck Boost Converter CC CV 0.5-30V 4A Adjustable)
SKU:
POW0024
Original price was: ₹1,999.00.₹761.86Current price is: ₹761.86. (Excl. 18% GST)
- Model: ZK-4KX
- Material: Fiber glass board, Electronic component
- Input Voltage: 5.0-30v
- Output Voltage: 0.5-30v
- Voltage Display resolution: 0.01V
- Current Display resolution: 0.001A
- Conversion Efficiency: about 88%
- Output Power: Natural heat dissipation 35W; Strengthen heat dissipation 50W
- Output Current: It can work stably at 3A for a long time, and can reach 4A under enhanced heat dissipation.
- Soft Start: Yes (The soft start may fail when it starts with high power and load module.)
