3.5 inch TFT Shield LCD Module 480×320 for Arduino Uno with Touch(Parallel Interface)
SKU:
DIS0012-1
Original price was: ₹1,999.00.₹973.73Current price is: ₹973.73. (Excl. 18% GST)
-
3.5-inch TFT LCD screen size
-
480 × 320 pixel resolution
-
65K RGB color display
-
ILI9486 display driver IC
-
8-bit parallel interface
-
Resistive touch panel support
-
On-board micro-SD card slot for media loading
-
Compatible with both 5V and 3.3V logic levels
Official 7Semi L89HA Breakout Multi-GNSS engines for GPS, IRNSS, GLONASS, BeiDou, Galileo and QZSS, GPS Module
SKU:
COM0031
Original price was: ₹1,699.00.₹973.73Current price is: ₹973.73. (Excl. 18% GST)
- 3.3V power supply
- I2C / UART interface
- Support IRNSS L5 band
- Embedded patch antenna and chip antenna
- Multi-GNSS engines for GPS, IRNSS, GLONASS, BeiDou, Galileo and QZSS
- Support DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
- Integrated LNAs for better sensitivity
- Great anti-jamming performance due to multi-tone active interference canceller
Official 7Semi L89 USB Dongle Multi-GNSS Engine for GPS, IRNSS, GLONASS, BeiDou, Galileo and QZSS
SKU:
COM0039
Original price was: ₹1,599.00.₹973.73Current price is: ₹973.73. (Excl. 18% GST)
-
GNSS Bands: GPS L1 (1575.42 MHz), Galileo E1, IRNSS L5 (1176.45 MHz), GLONASS L1, BeiDou B1
-
Multi-GNSS: GPS, Galileo, GLONASS, BeiDou, IRNSS (NavIC), QZSS
-
Position Accuracy: < 1.8 m (CEP)
-
Velocity Accuracy: < 0.1 m/s
-
Acceleration Accuracy: < 0.1 m/s²
-
Timing Accuracy: 1PPS, 3.9 ns RMS
-
Sensitivity: Acquisition –147 dBm, Tracking –163 dBm
-
Operating Temperature: –40 °C to +85 °C
-
Dimensions: 62.82 mm × 19.06 mm
Official Arduino UNO EK (एक) R4 Minima ABX00080_IN – Made in India
SKU:
DEV0033-1
Original price was: ₹1,399.00.₹998.00Current price is: ₹998.00. (Excl. 18% GST)
- Official Arduino UNO EK (एक) R4 Minima – Made in India
- Powered by Renesas RA4M1 Arm® Cortex®-M4 32-bit processor @ 48MHz
- 14 digital I/O pins (6 PWM outputs) and 6 analog inputs
- 5V logic compatibility for seamless integration with existing shields and sensors
- USB-C connector for faster programming and communication
- Increased memory and performance for complex projects
- Fully compatible with Arduino IDE and existing UNO shields
- Made in India for local manufacturing and accessibility
KUONGSHUN ESP32-CAM Development Board Test Board WiFi+ Bluetooth Module ESP32 Serial Port with OV2640 Camera
SKU:
DEV0006
Original price was: ₹1,899.00.₹999.00Current price is: ₹999.00. (Excl. 18% GST)
- Flash LED off: 180mA @ 5V.
- Flash LED on to maximum brightness: 310mA @ 5V.
- Deep-sleep: 6mA @ 5V min.
- Modem-sleep: 20mA @ 5V min.
- Light-sleep: 6.7mA @ 5V min.
Unsoldered ESP32-S3 WiFi Bluetooth compatible BLE 5.0 Mesh Development Board N16R8
SKU:
DEV0016
Original price was: ₹1,999.00.₹1,016.00Current price is: ₹1,016.00. (Excl. 18% GST)
- Chip: ESP32-S3
- Flash: 16 MB
- PSRAM: 8 MB
- Dimensions: Approx. 63.5mm x 28.5 mm
- Logic Level Voltage: 3.3V
NUCLEO-L073RZ Development Board, STM32 Nucleo-64, STM32L073RZ MCU, Arduino Uno & ST Morpho Connectivity
SKU:
DEV0067
Original price was: ₹3,800.00.₹1,100.85Current price is: ₹1,100.85. (Excl. 18% GST)
- Product: STMICROELECTRONICS NUCLEO-L073RZ Development Board
- STM32 microcontroller
- 1 user LED shared with ARDUINO®
- 1 user and 1 reset push-buttons
- 32.768KHz crystal oscillator
Official 7Semi ESP32-S3-Dev-BoardC-1-N8R2 WiFi, Bluetooth, Dual USB-C, RGB LED
SKU:
DEV0136
Original price was: ₹1,299.00.₹1,100.85Current price is: ₹1,100.85. (Excl. 18% GST)
-
SoC ESP32-S3-WROOM-1 (Dual-core Xtensa® LX7)
-
Wireless Wi-Fi 2.4 GHz and Bluetooth 5 LE
-
RAM / Flash 2MB PSRAM and 8MB Flash
-
USB Ports 2 × USB-C (OTG and JTAG/Serial)
-
Interfaces I2C, SPI, UART, ADC, PWM, CAN (TWAI®), GPIO
-
Operating Voltage 3.3V logic with 5V via USB input
-
RGB LED SK6812
-
Power Modes Active, Modem-sleep, Light-sleep, Deep-sleep
-
Sleep Current approximately 7 µA in deep-sleep mode
-
Development Environment Arduino, ESP-IDF, PlatformIO
-
Boot Button Download button; hold Boot and press Reset to enter firmware download mode via serial
-
Reset Button Press to restart the system
TTGOT-Display ESP32 Development Board 1.14 Inch LCD Control Board 4MB CH9102F Chip
SKU:
DEV0001
Original price was: ₹2,999.00.₹1,110.00Current price is: ₹1,110.00. (Excl. 18% GST)
- MCU: ESP32 Xtensa dual-core LX6 microprocessor
- Wireless Connectivity: Wi-Fi 802.11 b/ g/ n, BL V4.2+BLE
- Programming Platform: Arduino-ide, Micropython
- Serial chip: CH9102
- Optional Flash: 4M/16M
- Onboard functions Buttons: l006+I007, battery power detection
ACEBOTT QA019 ESP32 Max V3.0 with 1m Type-C Cable
SKU:
EDU0011
Original price was: ₹5,999.00.₹1,116.95Current price is: ₹1,116.95. (Excl. 18% GST)
- Model: ACEBOTT ESP32 Max V3.0
- Type: Microcontroller board
- Processor: 240 MHz dual-core
- Memory: 520 KB RAM, 4MB flash
- Connectivity: Wi-Fi, Bluetooth LE
Basic Starter Kit for R3 Projects
SKU:
SEN0171
Original price was: ₹2,501.00.₹1,120.00Current price is: ₹1,120.00. (Excl. 18% GST)
- The best option to starting learn about Arduino smd programming.
- High quality smd Uno R3 Basic Learning kit with 100% compatible with Arduino smd
- All components compatible with Arduino, can be used directly.
- Include High Quality Uno R3,830 tie-points Breadboard, Power Supply, Jumper Wires, Resistors, LED, etc.
Arduino UNO EK (एक) R4 Wi-Fi & Bluetooth – Made in India (Clone)
SKU:
DEV0033-2
Original price was: ₹1,999.00.₹1,134.00Current price is: ₹1,134.00. (Excl. 18% GST)
- Made in India 32-bit Arduino board with Wi-Fi & Bluetooth.
- Powered by Renesas R7FA4M1AB3CFM and ESP32-S3 module.
- 256 kB Flash, 32 kB SRAM, and 8 kB EEPROM.
- 12×8 programmable LED matrix for animations & games.
- 5V operating voltage, supports 6-24V input & USB-C power.
- Features DAC, CAN bus, and 14-bit ADC for advanced projects.
Official 7Semi BME690 Digital Sensor Module – Temperature, Humidity, Pressure, Gas | I2C/SPI
SKU:
SEN0218
Original price was: ₹1,699.00.₹1,143.22Current price is: ₹1,143.22. (Excl. 18% GST)
-
Official 7Semi BME690 digital environmental sensor module
-
Measures temperature, humidity, pressure, and gas (VOC)
-
Powered by Bosch Sensortec BME690 sensor
-
Supports I2C and SPI communication interfaces
-
Wide operating voltage 3.3V to 5V
-
Compact and low-power design
-
Easy integration with Arduino, ESP32, Raspberry Pi, STM32
-
Ideal for IoT, air-quality monitoring, and smart systems
3.5 inch SPI Touch Screen Module TFT Interface 480*320 with Touch
SKU:
DIS0012
Original price was: ₹1,863.56.₹1,185.59Current price is: ₹1,185.59. (Excl. 18% GST)
GP2Y0A710K0F 100cm to 500cm IR Distance Sensor with Cable
SKU:
SEN0079
Original price was: ₹2,100.00.₹1,185.59Current price is: ₹1,185.59. (Excl. 18% GST)
- Model: GP2Y0A02YK0F (100to 550 cm)
- Operating Voltage (VDC): 4.5 ~ 5.5
- Average Current Consumption (mA): 33
- Sampling Rate: 21-26Hz
- Distance Measuring Range (CM): 100 ~ 550
- Output Type: Analog Voltage
- Supply voltage:5V
- Current: 33-50mA
NUCLEO-L031K6 Development Board, STM32 Nucleo-32, STM32L031K6 MCU Eval Board, On Board Debugger, Arduino Nano Extension, Reset Push Button
SKU:
DEV0078
Original price was: ₹1,900.00.₹1,199.00Current price is: ₹1,199.00. (Excl. 18% GST)
- Product: NUCLEO-L031K6 Development Board
- Core Architecture: ARM
- Extension with Arduino™ nano connectivity
- Core Sub-Architecture: Cortex-M0+
- Silicon Family Name: STM32L0
- Silicon Core Number: STM32L031K6
- Silicon Manufacturer: STMicroelectronics
Unsoldered ESP32-S3 WiFi Bluetooth compatible BLE 5.0 Mesh Development Board N8R2
SKU:
DEV0015
Original price was: ₹1,678.00.₹1,200.00Current price is: ₹1,200.00. (Excl. 18% GST)
- Manufacturer Part No: ESP32-S3-DevKitC-1-N8
- Manufacturer: Espressif Systems
- Product Type: WiFi Development Tools – 802.11
- Product: Development Kits
- Tool Is For Evaluation Of ESP32-S3-WROOM-1
- Protocol Supported: 802.11 b/g/n
- Frequency: 2.4 GHz
- Operating Supply Voltage: 3.3V ~ 5V
- Protocol – WiFi – 802.11: WiFi
- Interface Type: GPIO, UART, USB
NUCLEO-L412KB Development Board, Nucleo-32, 32-Bit, STM32L412KB MCU, Arduino, ST Morpho Compatible
SKU:
DEV0071
Original price was: ₹1,900.00.₹1,221.19Current price is: ₹1,221.19. (Excl. 18% GST)
- Product: NUCLEO-L412KB Development Board
- STM32 microcontrollers in 32-pin packages
- USB communication (LD1), power LED (LD2) and user LED (LD3) three LEDs
- Reset push-button
- ST-LINK USB VBUS or external sources (flexible power-supply options)
MSP-EXP430FR2433 – LaunchPad Development Kit (with Sensing MCU, LaunchPad, BoosterPack Connector)
SKU:
DEV0101
Original price was: ₹3,999.00.₹1,249.00Current price is: ₹1,249.00. (Excl. 18% GST)
- ULP FRAM technology based MSP430FR2433 16-bit MCU
- EnergyTrace Technology available for ultra-low-power debugging
- 20-pin LaunchPad kit standard leveraging the BoosterPack ecosystem
- On-board eZ-FET debug probe
- 2 buttons and 2 LEDs for user interaction
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board
SKU:
DEV0024
Original price was: ₹2,045.00.₹1,271.19Current price is: ₹1,271.19. (Excl. 18% GST)
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
