600 Pcs 1/4W 1% 30 Kinds Each Value Metal Film Resistor
- 1/4W 1% Tolerance Metal Film Resistors so 5 color bands, This is a great assortment for front ends and low power applications.
- These resistors are typical axial-lead metal film resistors, which have much better temperature stability than their carbon equivalents,
- Lower noise and are generally better for high frequency or radiofrequency applications.
60mm Multifunctional Welding Fixture with Magnifying Glass
- 100% brand new and high quality
- A useful Aid for soldering work or model makers
- Adjustable crocodile holding clamps
- This is a 60mm Magnifying Glass Multifunctional Welding Fixture.
- Magnifier with auxiliary clip
60W 220V Adjustable Temperature Electric Soldering iron
- Soldering iron length: 2.5 inches (6.5 cm)
- Power: 60W
- 70% lower power consumption compared to ordinary soldering irons
- Thermostat circuit with temperature adjustable range between 200 – 450°C (392 – 842°F)
65pcs Flexible Breadboard Jumper Wires
- The head of the cables is stronger, Don’t worry it will easy to fall.
- Use for Arduino Or other kinds of circuit experiment.
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
6Pin PL2303HXD USB to TTL/RS232
- Supports RS-232 serial interface with Programmable baud rate from 75 bps to 12 Mbps
- Compatible with the RS422/RS485 interface
- Extensive flow control mechanism like adjustable high/low watermark level, automatic hardware or software flow control, and inbound data buffer overflow detection.
-
The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB
- The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTD’s FT232RQ USB to Serial
- Cables are FCC, CE, RoHS compliant and are available at TTL levels 3.3V
-
It is USB 2.0 full speed compatible. The USB side of the cable is USB powered.
7Semi BNO055 9-DOF Absolute Orientation Sensor Breakout I2C Qwiic
-
9-axis absolute orientation for accurate 3D motion tracking
-
Bosch BNO055 smart sensor with accelerometer, gyroscope, and magnetometer
-
Advanced sensor fusion for stable and precise orientation data
-
I2C interface for easy integration with microcontrollers
-
Supports 3.3V and 5V operating voltage
-
Low power consumption for longer battery life
7Semi RJ45 Connector MagJack Ethernet Breakout
-
Official 7Semi RJ45 MagJack Ethernet Breakout Board
-
LPJ0011FBNL single-port RJ45 connector
-
Integrated 10/100 Base-T Ethernet magnetics
-
Pre-soldered RJ45 jack for quick setup
-
Built-in status LEDs and EMI shielding
-
All Ethernet pins broken out for easy access
-
Breadboard and prototype friendly design
-
Ideal for IoT, robotics, and industrial projects
801S Vibration Shock Sensor Sensitivity Adjustable
- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
858D Hot Air Soldering Station with Display
- Body type: Full metalized Powdered coated.
- Controller: Micro Controller based with 7 segment display with SET and READ mode.
- ESD: Yes safe
- Temperature setting: Push-button
- Fan setting: Knob type
- Blower Cut-off: Automatic on keeping it in the provided cradle.
8GB Micro SD Card, Class 10 (China Quality)
9 in 1 Gas Sensor kit
- Power supply: from 2.5 V to 5 V
- Analog and digital output
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
9v Battery Snap Connector with DC Jack (Battery Connector Cap)
- Excellent material
- It is an environmental 9V battery buckle
- The Cable Length: 10cm Approx.
- Convenient for connecting a battery to your application.
- Save power and protect the environment
- Good electrical conductivity and comfortable sense of touch
9V HW Battery Connector for DIY Projects and Electronics (10cm Cable)
- Made of hard leather.
- Excellent material, fine workmanship.
- It is an environmental 9V battery buckle.
- Wire Length: 15cm.
- Color: Black.
9V Original HW High-Quality Battery
- Constant 9V Output till lasts
- Metal Jacket Body
- Good Built Quality and hence Leakproof
- Easy to install and Replace
- Corrosion free Connector Point for long-term use
- 0% Mercury and Cadmium. Environment-friendly
- OEM Compatible.
AC110-240V 360 Degree PIR Infrared Motion Sensor Switch
- Type: PIR Switch
- Delay timing: 15 Sec, 45 Sec, and 5 Min.
- Working Voltage/Frequency: AC110-240V, 50/60Hz
- Sensing Distance: 4-6m
- Fitting Diameter: 40 mm
- Angle Coverage: 110 degrees
ACEBOTT Smart Car Starter Kit – QD001
- Power Supply Voltage: 4.5V ~ 12V
- Motor Drive Chip: L293D
- Speed Adjustment: PWM speed adjustment
- Driving Current: 0.6A (peak 1.2A)
- Logic Control Chip: 74HC595D
- Interfaces: Serial port, ultrasonic, line patrol, 3-way analog reading, 3-way steering gear
ACEBOTT AI Expansion Pack Kit for QD001-QD003
- AI vision expansion kit for the ACEBOTT QD001 Smart Car
- Beginner-friendly setup for kids and AI enthusiasts
- Introduces artificial intelligence and machine vision concepts
- Perfect for early STEM & STEAM education
- Enhances the learning experience of the base smart car kit
ACEBOTT Bionic Biped Robot Kit for Arduino ESP32 – QD021
- Brand Name : ACEBOTT
- Model Number : QD021
- Category : STEAM & STEM Kit, STEAM & STEM Toy, Robot Kit
- Type : Bionic Biped Robot Kit
- Recommended Age : For Age 12+ & Makers
- Application : Scientific & Educational Toys, Home STEAM & STEM Education, Classroom STEAM & STEM Education
- Controller Boards : ESP32
- Programming Arduino, ACECode
ACEBOTT ESP32 5-DOF Robot Arm Kit Expansion Pack for QD001-QD007
- 5-DOF movement for flexible control
- Works with QD001 smart car
- ESP32-based with Wi-Fi/app/joystick control
- Programmable with memory function
- Limit protection for safe operation
